Welcome to the official website of Nantong Jiateng Precision Mould Co., Ltd.!
26-04-14
Explore the latest developments and trends in mold design and manufacturing at Nantong Jiateng Precision Mould Co., Ltd.
22-05-18
Analysis of the Injection Molding Process Flow
It has a wide molding temperature range and exhibits rapid heating, melting, and curing, resulting in generally short molding cycles. Temperature settings: barrel temperature around 200°C; excessively high material temperature can lead to silver streaks, while too low a temperature will compromise transparency.
22-05-10
Molds are various tools and dies used in industrial manufacturing to produce desired products through processes such as injection molding, blow molding, extrusion, die casting, forging, smelting, and stamping. In short, a mold is a tool for shaping and forming articles; it consists of multiple components, and different types of molds are composed of distinct parts.
22-05-10
The chemical composition determined by macroscopic examination plays a decisive role in ensuring the mechanical properties of steel; however, compliance with compositional specifications alone does not fully guarantee those properties. Due to the non-uniformity of microstructure and composition within steel, macroscopic examination largely helps to address this limitation.
22-05-18
Analysis of the Causes of Cracking in Injection-Molded Products
Cracking is a common defect in plastic products manufactured via injection molding, primarily caused by stress‑induced deformation. The main sources of such deformation include residual stresses, external stresses, and stresses arising from the external environment.
22-05-10
Mold Classification for Casting Systems
Depending on the type of gating system, plastic molds can be classified into three categories.
22-05-10
In addition to the mold itself, components such as the mold base, core, and ejector mechanism are also required; these parts are typically designed to be universally applicable.
22-05-10
Molds classified by the material they form
Hardware molds are classified into: stamping dies (such as blanking dies, bending dies, deep-drawing dies, turning dies, necking dies, corrugating dies, bulging dies, and shaping dies), forging dies (including die-forging dies and upsetting dies), extrusion dies, die‑casting dies, and other types of forging dies.
Nantong Jiateng Precision Mould Co., Ltd.
National Unified Business Consultation Hotline
No. 85, shuangyun Road, Xingdong Town, Tongzhou District, Nantong, Jiangsu Province, China.
Scan it
Open the official mobile site
Leave us a message
Note: Please provide your contact information, and our specialists will get in touch with you as soon as possible!